The use of Bricks or Pavers to produce a sidewalk or patio area matches a home in a method that is unrivaled. In addition, installing a Brick or Paver sidewalk does not necessarily need a pro.
The secret to setting up a Brick or Paver Walkway is to very first appropriately prepare the location where the bricks/pavers are to be installed. In addition, string lines need to be strung on each side of the pathway.
When the location has actually been dug down, 3/4" gravel stone should be laid in and tamped down firmly. The height in between the tamped down sand and the stringline should equal the thickness of the brick or paver.
Now that you have a steady base, place a 1" pipe or ledger board the length of the pathway on either side of the sidewalk. Then utilizing a flatedge, e.g. a 2"x4" board, slide it over the 2 lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.
Now place on the level sand/stone dust strips of plastic brick borders. Set up a run on both sides of the ready area. These strips will serve as your pathway border and assistance to preserve the stability and shape of the walkway. You can get these plastic strip borders at a lot of home improvement shops. The strips need to be anchored down with 12" galvinized nails. You need to sink these nails into the ground and through the strips every foot.
When this is done, you can then begin to lay the bricks/pavers. There are numerous patterns you can lay. I especially like the Herring Bone pattern. The secret to laying the bricks/pavers is to guarantee that they interlock with each other. Always stagger nearby rows of bricks by 1/2 of a brick to interlock them. This will again help maintain the stability of the walkway.
Undoubtedly bricks/pavers will require to be cut or divided when constructing the sidewalk. To in fact cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the spot where you want to break the brick. If your sidewalk has curves you will require to buy/rent a wetsaw.
After setting up the bricks, construct up the outside edges with additional sand, and then shovel in the topsoil and load down firmly.
Spread stone dust over the new walkway and sweep into the fractures. This will complete the interlocking of the bricks and assist to eliminate any more info weed growth.
In addition, setting up a Brick or Paver walkway does not always need a pro. The key to installing a Brick or Paver Walkway is to very first correctly prepare the location where the bricks/pavers are to be set up. Now that you have a stable base, place a 1" pipe or journal board the length of the sidewalk on either side of the walkway. These strips will act as your pathway border and aid to keep the stability and shape of the walkway. Undoubtedly bricks/pavers will need to be cut or divided when building the pathway.